Description:
This is the clear resin replacement parts for the AMT/ERTL 1/420 Scale USS Defiant's opaque rear plastic Warp Engines and Main Deflector. These are replacement parts (5 clear, 3 opaque) that allows the model builder to build their DS9 USS Defiant starship with lighting. They are cast in a clear color dyed and opaque polyurethane resins and air bubble free. 

Contains:
Clear Blue Engine Grills (2), Resin Frames (2), Clear Red Bussard Collectors (2), and Clear Blue Deflector (1).

NOTE:
The kit replaces kit parts:
#4(Main Deflector) Opened up resin part with clear resin inserts.
#10, #9 (Warp Engines) Opened up resin parts with clear resin inserts.
#17 (Bussard Scopes). Solid clear resin insert that fits into kit parts.
#7 and #8 which must be cut open to fit. Then mask and opaque the non lit exterior surfaces.

AMT/ERTL STAR TREK DS9 USS Defiant Model Kit NOT INCLUDED.

$20.00 USD - In Stock

 Customers interested in this product were also interested in:
> AMT/ERTL 1:420 Scale Star Trek DS9 USS Defiant Model Kit

> More DLM Accessories
> More 1:420 Scale Accessories
> More Accessories

Description:
The clear resin copy replacement part for the Monogram kit of the 1/677 Scale Intrepid Class, U.S.S. Voyager. The opaque resin plastic Main Deflector Dish supports the clear dish. These are a replacement parts that allows the model builder to build their ship with lighting in mind.

These are virtually the same kit parts used in the later issued Special Edition “Pro Modeler” Voyager but it is cast in a clear blue polyurethane resins and gray opaque resins.

Also included in this upgrade kit is the smaller Clear Auxiliary Deflector located to the top front of the of the main hull cast in clear blue resin. 

Contains:
Clear Blue Main Deflector Dish (1), Resin Deflector Dish Frame (1), Resin Main Deflector (1), and Clear Blue Auxiliary Deflector (1).

NOTE:
The kit replaces kit parts:
#4(Main Deflector) Opened up resin part with clear resin inserts.
#10, #9 (Warp Engines) Opened up resin parts with clear resin inserts.
#17 (Bussard Scopes). Solid clear resin insert that fits into kit parts.
#7 and #8 which must be cut open to fit. Then mask and opaque the non lit exterior surfaces.

Revell/Monogram Star Trek USS Voyager Model Kit NOT INCLUDED.

$12.50 USD - In Stock

> More DLM Accessories
> More 1:677 Scale Accessories
> More Accessories

Description:
These are the clear resin replacement parts for the AMT/ERTL 1/1000 Scale USS Excelsior. These are replacement parts (11 clear, 5 opaque) that allows the model builder to build their Excelsior Class starship with lighting. They are cast in a clear color dyed and opaque polyurethane resins and air bubble free.

Contains:
Clear Blue Impulse Engine Crystals (2), Clear Planetary Sensor Array Spotlights (6), Resin Forward Torpedo (1), Resin Aft Torpedo (1), Resin Warp Engine Dekoids (2), Clear Bridge Piece (1), Clear Control Island (1), and Clear Blue Deflector (1).

NOTE:
AMT/ERTL USS Excelsior Model Kit NOT INCLUDED.

$20.00 USD - In Stock

 Customers interested in this product were also interested in:
> AMT/ERTL 1:1000 Scale Star Trek USS Excelsior Model Kit
> Trekmodeler TMP/NX ERA Federation Blinker System

> More DLM Accessories
> More 1:1000 Scale Accessories
> More Accessories

Description:
These are the clear resin replacement parts for the AMT/ERTL 1/1000 Scale USS Excelsior. These parts are for model builders who will not be lighting up their Excelsior Class Starship. Made of solid gray polyurethane resin.

Contains:
Resin Forward Photon Torpedo Launchers (2), Resin Aft Photon Torpedo Launchers (1), and Resin Warp Engine Dekoids (2).

NOTE:
AMT/ERTL USS Excelsior Model Kit NOT INCLUDED.

$7.00 USD - Out of Stock

 Customers interested in this product were also interested in:
> AMT/ERTL 1:1000 Scale Star Trek USS Excelsior Model Kit

> More DLM Accessories
> More 1:1000 Scale Accessories
> More Accessories

Description:
These are the clear resin replacement parts for the AMT/ERTL 1/1000 Scale USS Excelsior. These are replacement parts (13 clear, 3 opaque) that allows the model builder to build their Excelsior Class Refit starship with lighting. They are cast in a clear color dyed and opaque polyurethane resins and air bubble free. 

Contains:
Clear Blue Impulse Engine Crystals (2), Clear Planetary Sensor Array Spotlights (6), Resin Forward Torpedo (1), Resin Aft Torpedo (1), Clear Blue Warp Engine Bussard Collectors (2), Clear Bridge Piece (1), Clear Control Island (1), and Clear Blue Deflector (1).

NOTE:
AMT/ERTL USS Enterprise NCC-1701-B Model Kit NOT INCLUDED.

$20.00 USD - In Stock

 Customers interested in this product were also interested in:
> AMT/ERTL 1:1000 Scale USS Enterprise NCC-1701-B Model Kit
> Trekmodeler TMP/NX ERA Federation Blinker System

> More DLM Accessories
> More 1:1000 Scale Accessories
> More Accessories

Description:
Now you can power up the Warp and Impulse Engines with clear lighting parts for the 1/323 Scale model of Chekotay’s Maquis Rebel Peregrine Class ship. It fits to the Monogram model. The opaque gray resin parts has openings to fit in clear red panels. Clear blue grills fit into the wing hinge and along the sides. Some cutting of the kit is required to let the light shine out of the kit plastic. Use the light source of your choice with either EL materials like LightSheet, CCFL neon, and or LED's and lamps that will power up your Maquis rebel fighter. Parts assemble to the kit with CA adhesives or epoxy.

Contains:
Clear Red Engine Panels (8), Clear Blue Engine Grills (6) and Resin Engine Frames (6).

NOTE:
Electronics are NOT INCLUDED.
Revell/Monogram ST: Voyager Maquis Ship Model Kit NOT INCLUDED.

$25.00 USD - In Stock

 Customers interested in this product were also interested in:
> Revell/Monogram Star Trek Voyager Maguis Ship Model Kit

> More DLM Accessories
> More 1:323 Scale Accessories
> More Accessories

Description:
These are the clear resin replacement parts for the AMT/ERTL 1/72 Scale Deep Space Nine Runabout Rio Grande model kit. For lighting purposes this kit adds clear amber colored Impulse Intake Ducts to the front of the pylon supports. Replaces kit opaque plastic parts. They are cast in a clear color dyed and opaque polyurethane resins and air bubble free. 

Contains:
Clear Amber Impulse Intake Grills (2) and Resin Impulse Intake Frames (2).

NOTE:
AMT/ERTL DS9 Runabout Rio Grande Model Kit NOT INCLUDED.

$10.00 USD - In Stock

 Customers interested in this product were also interested in:
> AMT/ERTL 1:72 Star Trek DS9 Runabout Rio Grande Model Kit

> More DLM Accessories
> More 1:72 Scale Accessories
> More Accessories

Description:
This pre-built system is also pre-set for accurate blink rates of the navigation strobes and formation lights of TMP era Federation Starships or any Starfleet vessels of the NX period.

This system will suit the following model kits: Polar Lights 1/350 scale USS Enterprise NCC-1701-A, Polar Lights 1/350 scale Enterprise NX-01, AMT 1/537 scale USS Enterprise NCC-1701/NCC-1701-A , AMT 1/537 scale USS Reliant, AMT 1/1000 scale USS Excelsior NCC-2000/USS Enterprise NCC-1701-B and any kit-bash of those eras.

Includes: One circuit board (pre-assembled) and detailed illustrations.

Note: LED's not included.

$24.95 USD - In Stock

> More TrekModeler Electronic Accessories
> More 1:1000 Scale Accessories
> More Accessories